large effectiveness bucket elevator maker from china
Introduction
THG/TDG Large Efficient Bucket CZPT is the upgraded from TH/TD bucket elevator. Bucket elevator is composed of sprocket/drum, chain/belt, pushed gadget, head part, center casing and tail section and many others. Large Successful Bucket CZPT can be extensively employed in numerous industries these kinds of as mining, mineral, chemical, agriculture, power, foodstuff and other industries etc.
Positive aspects and Features
one. Successful bucket elevator device with massive capacity, large lifting height.
two. With varieties of buckets, to meet up with the prerequisite of diverse types of material.
3. THG bucket elevator adopts alloy steel ring chain, right after surface managing and heat managing, reasonable hardness, high power, much better abrasive resistance.
4. TDG bucket elevator adopts steel twine rubber belt, great toughness, substantial power.
five. CZPT, tail areas and center housing cases with good sealing, no substance and dust leaked, with no pollution.
six. With holdback to avoid materials backflow when shut down in an unexpected emergency.
seven. Bottom adopts counter weight consider-up system, make itself computerized get-up, to avoid belt observe slip or chain take off.
8. Increase speed management sensor and mechanical stage detector, it is matched by CZPT.
9. Motor brand name can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG etc
ten.CZPT brand can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF etc.
CZPT Parameter:
TDG Belt Bucket CZPT(with Sh bucket)CZPT Parameters Table | |||||||||||
Major CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
a hundred and sixty | 200 | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Capacity Q(m³/h) | 32 | forty five | 72 | a hundred and one | 158 | 220 | 348 | 492 | 788 | one.22 | 1541 |
Bucket Volume /L | 2.6 | 4 | seven | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Excess weight of traction belt&bucket for each meter(kg/m) | 22 | 21.5 | 33 | 33.2 | forty two.two | 62.3 | 78.fifty three | 106 | a hundred forty five | 155.five | 223 |
Operating Pace v/(m/s) | one.2 | 1.two | 1.34 | 1.34 | 1.5 | one.five | 1.sixty eight | one.65 | one.86 | one.86 | one.836 |
Lifting peak max/m | eighty | 80 | eighty | 80 | eighty | eighty | eighty | 80 | eighty | eighty | 80 |
Be aware:the potential in the table is calculated in accordance to 75% of the fill issue. |
TDG Belt Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Main CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
160 | two hundred | 250 | 315 | four hundred | 500 | 630 | 800 | a thousand | 1250 | 1600 | |
Capacity Q(m³/h) | 24 | 31 | fifty one | seventy four | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
Bucket Volume /L | 1.nine | two.nine | 4.6 | 7.four | 12 | 19 | 29 | forty seven | 74 | 117 | 184 |
Pitch of Buckets /mm | 260 | three hundred | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Excess weight of traction belt&bucket for every meter(kg/m) | 22 | 21.5 | 33 | 33.2 | 42.2 | sixty two.3 | 78.53 | 106 | a hundred forty five | one hundred fifty five.5 | 223 |
Operating Speed v/(m/s) | one.2 | one.two | one.34 | one.34 | one.five | one.five | 1.68 | one.65 | one.86 | one.86 | 1.836 |
Lifting height max/m | eighty | 80 | 80 | 80 | eighty | 80 | 80 | 80 | eighty | eighty | eighty |
Notice:the capability in the desk is calculated according to 75% of the fill factor. |
THG Bucket CZPT(with Sh bucket)CZPT Parameters Table | |||||||||||
Primary CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
160 | two hundred | 250 | 315 | four hundred | 500 | 630 | 800 | 1000 | 1250 | 1600 | |
Capability Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
Bucket Volume /L | 2.6 | 4.1 | six.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
excess weight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.four | forty three.25 | sixty.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Working Velocity v/(m/s) | 0.93 | .93 | 1.04 | one.04 | one.17 | 1.17 | 1.32 | one.31 | one.47 | 1.47 | one.47 |
Lifting top max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
1. Filling factor ψ=one 2. Bucket quantity=Quantity of complete water 3. Greatest lifting peak = axis length of bucket elevator |
THG Bucket CZPT(with Zh bucket)CZPT Parameters Desk | |||||||||||
Main CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
a hundred and sixty | 200 | 250 | 315 | 400 | 500 | 630 | 800 | one thousand | 1250 | 1600 | |
Capability Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
Bucket Quantity /L | one.9 | 2.9 | four.6 | 7.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
bodyweight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.4 | 43.25 | sixty.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Managing Velocity v/(m/s) | 0.93 | .93 | 1.04 | 1.04 | one.17 | one.17 | one.32 | 1.31 | one.47 | 1.47 | 1.47 |
Lifting peak max/m | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
1. Filling issue ψ=one 2. Bucket quantity=Volume of total drinking water 3. Optimum lifting top = axis distance of bucket elevator |
Selection Conditions
♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Yes or No) |
♦Handling ability (Ps. It signifies the total | ♦Working environment is indoor or outside:________ |
material capacity feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Sure or No) |
♦Bulk Density: _____t/m3 | ♦Working atmosphere temperature: _______ ºC |
♦Lifting height of the elevator (distance amongst | ♦Upstream products (Ps. It means what kind of |
inlet and outlet):__________m | tools is employed to feed the material): _____ |
♦Max. granule size of the feeding content: ____mm | ♦Downstream tools (Ps. It indicates what variety of |
♦Percentage of Max. granule in content:_________% | gear is utilised to discharge the substance): _____ |
♦Material temperature: _____ºC | ♦Working energy supply: _____V ______HZ |
♦water content material:____% |
We mostly offer the following gears :
Vibrating Screen | Rotary vibrating display screen |
Ultrasonic vibrating screen | |
Gyratory monitor | |
Trommel monitor | |
CZPT vibrating display | |
Circular vibrating monitor | |
Dewatering display | |
Vibrating feeder | |
Belt CZPT | Belt conveyor |
Sidewall belt conveyor | |
Transportable belt conveyor | |
Shuttle conveyor | |
Tripper | |
Bucket CZPT | Effective bucket elevator |
Belt bucket elevator | |
Ring chain bucket elevator | |
Plate chain bucket elevator | |
Cement bucket elevator | |
Silo bucket elevator | |
Screw CZPT | U-variety screw conveyor |
Cement screw conveyor | |
Pipe screw conveyor | |
Scraper CZPT | Horizontal scraper chain conveyor |
Incline scraper chain conveyor | |
Grain scraper chain conveyor |