Material Handling Power UNIT two
This energy unit features power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering pace managed through the pressure compensated flow control valve. Solutions of this series could be broadly utilized in the sector of logistic devices which include fork lift, mini lift table, and so on.
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned in advance of mounting the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil changing is required after the initial a hundred operation hours,afterwards as soon as every single 3000 hours.
five. The electrical power unit must be mounted horizontally.
Materials Handling Power UNIT one
This electrical power unit is developed for that fork lift market, consisting of remarkably effective gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down motion are controlled from the lever in the manual release valve, which can be equipped with an electric switch to activate the motor. The lowing speed is managed by the strain compensated flow manage valve.
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is advised .
4. Oil transforming is required just after the initial one hundred operation hours, afterwards as soon as every 3000 hours.
five. The energy unit shown is made to be mounted horizontally.