Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is especially made for gear coupling applications to improve coupling life whilst significantly minimizing servicing time. Its higher viscosity base oil and tackifier mix to help keep the grease in area and avoid separation and it truly is in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and manufactured using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces typically identified in couplings. Bearing or general purpose greases have a tendency to separate and eliminate effectiveness because of high centrifugal forces around the different components at higher rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate while in the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is made to very resistant to centrifugal separation on the oil and thickener, which lets the lubricant to become employed for a rather lengthy time period of time.
One of the tricks to the good results of Gear Coupling Grease is the variable consistency throughout the functioning cycle in the application. The consistency of our gear coupling grease adjustments using the working problems. Working in the lubricant underneath actual support circumstances leads to the grease to turn into semi-fluid, functionally solash lubricating the dress in surfaces of your coupling. As the grease cools, it returns towards the original consistency, therefore preventing leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
Large load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in area beneath higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?