Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for instance on camera focus rings. They also provide an economical alternative where a sizable gear is required or an extended stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. We offer a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing can be applied just within the tooth region. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Warmth treated surface gears with high precision and power has excellent cost-functionality ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, long life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of tooth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and quantity of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and quantity of the teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-trimming brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where steel racks do no have this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guidebook Rails (ARL) : Guidebook Rails for Molder Versatile Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the system of a versatile rack and equipment, a rotational joint actuator named vsaFGR is certainly proposed to regulate the joint stiffness. The flexible gear rack could be regarded as a combination of a nonlinear elastic component and a linear adjusting system, providing benefits of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible gear rack can be perpendicular to the joint loading drive, so the power required for stiffness regulating is as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive of up to approx 270 degrees for example on camera focus bands. They also provide an economical alternative where a large gear is required or a longer stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. You can expect a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is usually applied just within the tooth region. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Heat treated ground gears with high precision and strength has excellent cost-functionality ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack made of Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of the teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and number of the teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guide Rails (ARL) : Guidebook Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials can be found on ask for. Moulded Hostaform Racks are available to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator named vsaFGR is definitely proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a non-linear elastic component and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is usually in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with respect to the flexible equipment rack is definitely perpendicular to the joint loading pressure, so the power necessary for stiffness regulating is really as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.