Please follow the alternative instructions provided with the substitute locks for proper installation. Make sure you advise proper lock assembly edition/lettered pair necessary to ensure proper fit.
The ignition lock assembly on your car is comprised of two separate parts; the lock cylinder, which – in cars produced after about 2000 — uses a passkey to help stop theft, and an electrical portion called the ignition swap that passes power to devices such as wipers, electric home windows, door locks and the radio. The ignition switch also sends capacity to the starter electric motor when you switch the key. The ignition lock is where you insert the main element to start the car and locks the tyre until the key is inserted and turned to the “on” position. The steering wheel cannot be rotated without the key in the “on” position, this means a thief cannot drive off with the car just by hot-wiring it. If the ignition lock assembly — either component — breaks, it ensures that you won’t manage to drive the car until it’s repaired. The ignition lock itself can’t be repaired and should be replaced, generally by a mechanic with the proper tools and knowledge. If the electrical area of the assembly breaks, you’ll be able to replace it generally in most vehicles without disturbing the ignition lock. A damaged ignition lock assembly can show up in various ways. You may notice that it’s receiving harder to turn the key to start the automobile – almost like the essential doesn’t fit anymore. At times the tyre jams following the car starts and you have problems moving it. The problems can be intermittent as the assembly fails, which implies that sometimes the car will start with out a problem and various other situations the engine won’t begin or may keep running even after you turn off the key. Because a destroyed or failing ignition lock assembly is quite annoying and can make your vehicle unreliable, you will most probably want to consider it to your mechanic for diagnosis and mend as soon as you notice the problem.

Normally you will reuse the old lock rung from the old lock assemblies. Even so, if damaged, you must also order an upgraded rung.

Replacement lock assemblies are sold in pairs only and include instructions and all mounting fasteners.