Highest dress in resistance offered by sealing grease among pins and bushings
The sturdiness of chain is significantly enhanced given that grease is sealed involving the pins and bushings by O-rings. The O-ring chain could be the most reliable model with the Ultimate Daily life Chain Series with its outstanding wear resistance even during the ailments or environments where chain servicing is tricky.
Recommended uses.
?Conditions wherever regular chain replacement is needed as a result of put on stretch
?Conditions in which lubrication through the services is unattainable
?In an environment with a great deal soil, sand, dust, and so forth.
?Applications that call for strength higher than that of a sintered bushing roller chain
Other options
?Decreasing noise. (The noise level is 3 dB reduced in contrast to conventional roller chains.)
?Decreasing vibration using the friction designed by O-Ring. (The electrical power reduction due to the friction is nearly negligible, because the frictional force in between the pins and bushings is for commonly while in the applications.)
Choice of chains
The power of an O-ring chain is almost the same as that of a regular roller chain. (Because the pins are longer than people of conventional roller chain, the typical rupture power is somewhat lower.)
For selecting a suitable chain, refer to “Selection of Chains” .
When the services ambient temperature is increased than 80° C, specific heat resistant O-rings has to be used. In this case, make contact with us for more information.
Connecting hyperlinks and offset backlinks
Two sorts of connecting links can be found: clearance match and interference fit. When large power or durability is needed, use interference-fit connecting link. Only 2POJ is obtainable since the offset hyperlink for all sizes.
Sprockets
O-ring chain employs longer pins than a regular roller chain. When using multiplex O-ring chain, the normal sprocket for multiplex chains cannot be applied.
Caution
O-ring chain isn’t encouraged in applications in which solvents or other substances could assault “Nitric Rubber”. Special material O-rings may also be obtainable for these problems: Please consult us for details. Normally, “Nitric Rubber” is broken by get in touch with with all the following chemical elements.