Ever-Power offers telescopic drive shafts in a number of design types, such as Heavy Duty, Stainless Steel and Leveler Strength.

Drive shafts, also known as articulated shafts, are shafts that include two universal joints. The simplest kind of drive shaft consists of a joint at each end. The configuration is actually an extended double joint for overcoming distances and offsets between the drive and the driven load. Drive shafts also provide a remedy for bridging angular misalignment.
Telescopic Drive Shafts
Drive shafts can include a telescopic middle factor that allows quicker and simpler repositioning than conceivable with a rigid two-joint shaft. They enable easy length adjustment in axial misalignments.
Spring-Loaded, Quick-Change Shafts for Reducing Downtime
Spring-loaded drive shafts consist of two back-to-back single universal joints connected with a spring-loaded intermediate shaft. It enables the travel shaft to end up being quickly removed and changed without tools. Pinning of outer yokes is not required because the spring stress on the intermediate shafts holds the quick-modify universal joint protect at each end.
Fail-Safe Stop Solution
Spring-loaded drive shafts can be customized to add a fail-secure solution. If the application significantly exceeds the joint’s ranked torque capacity, the drive shaft could be designed to fail and prevent in a safe manner, without damaging the engine.
We uses the very best products and components to meet all agricultural drive shaft needs. Drive Shafts, Inc. likewise carries an extensive line of plastic material driveline shielding from Universe Shield.
PTO belt driven centrifugal pumps were initial introduced in 1964 and enabled the applicator to install centrifugal pumps directly on 540 RPM and 1000 RPM tractor PTO shafts. The simple, yet durable design of the PTOC pump provides withstood the check of time while many attempts at imitation attended and gone.

The main element to success of the belt motivated pump has been the Springtime Loaded Idler. The idler maintains right belt pressure which Pto Spline Shaft minimizes the load on the pump bearings. Moreover, the idler facilitates absorb the shock of PTO engagement that may destroy cog belts or gears.

Model PTOC belt driven pumps will be easy to operate and maintain. Belts can be changed in the field with bare minimum downtime and at very little cost. Maintenance features likewise incorporate sealed ball bearings and a readily replaceable mechanical seal. The belt safeguard provides complete insurance of the pulleys, shaft and belt. All PTO influenced pumps include a stainless steel shaft and wear ring for excellent corrosion resistance.
We just need to know very well what series you want, the yoke you want on each end, what duration you want the driveshaft overall compressed, and we will take care of the rest.