rotary cutter gearbox

rotary cutter gearbox
RC-20 Series
Specs
Torque: 1,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: one:two.five, one:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.forty seven L)
Fat: 34 lbs. (fifteen.4 kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-thirty Sequence
Specifications
Torque: 2,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:one.71, 1:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Weight: 51 lbs. (23.1 kg)
Apps
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-fifty one Sequence
Specifications
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:one.forty seven, 1:one.seventy one, one:one.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Bodyweight: fifty six lbs. (25.four kg)
Applications
Rotary Cutters Rotary Slashers
Gears: Accessible with either straight bevel or spiral bevel gearing.
Energy: Hp & Torque dependent on AGMA method for constant obligation in addition a support or load class element.
Shafting: Various dimensional, metallurgical, and heat-treat choices accessible.
Bearings: Geardrives obtainable with various bearing life choices.
Lubrication: Drives accessible with numerous lubes relying on operating qualities

Replacement Rotary Cutter gearbox, 40hp rated, one-three/8″-6 spline enter shaft, one.fifty seven” X 12 tapered spline output shaft and one:1.47 velocity up ratio. These gearboxes have a square housing configuration and are equivalent in mounting and ratio to the spherical configuration gearboxes. These are unique equipment gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which showcased slip clutch PTO shafts. This gearbox will not suit the IM400, IM500 and IM60 models as they have a smooth input shaft! If your gearbox has a twelve spline output shaft and a 1-3/8″ – 6 spline enter shaft this gearbox will operate. Bolt pattern is 4-3/four” on heart hole to hole and six-3/4″ heart to middle of bolt gap on diagonal. The mounting holes form a square bolt pattern.

rotary cutter gearbox

If you would certainly such as to understand more about rotary cutter gearbox, call us or merely see us at our internet site.