Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is designed to operate materials dealing with products. The lowering motion is achived through the solenoid valve together with the reducing speed controlled by an adjustable needle valve. The left and proper functions are equipped by using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please consult our sales engineer for that different pump displacement, motor power or tank capacity.
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean the many hydraulic elements concerned prior to installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. This power unit should be mounted horizontal.
five. Check the oil degree during the tank right after the first commence from the power unit.
six. Oil altering is required right after the first one hundred operation hours, afterwards when just about every 3000 hrs.