TF Type Flanges
Model TF flanges are produced from exactly the same high-strength cast iron because the S flanges, but are designed to accommodate the international common Taper Lock bushing for uncomplicated set up and removal
TF Type flanges allow for mounting the bushing on the front (hub) side from the flange
TF flanges can be found in sizes six as a result of 16 and can be applied with any style of sleeve as pictured on page SF-5
TR Type Flanges
TR flanges are very similar for the TF style, but let for your Taper Lock Bushing to be mounted and removed from
the reverse or serration side in the flange
The limited torque ratings of the Taper Lock Bushings permit TR flanges to only be utilised with EPDM or Neoprene sleeves
Various bushing sizes are utilized, so they’ve got unique maximum bores compared to the TF flanges
Sizes six through sixteen are available
Taper-Lock Bushings
The field conventional taper lock bushing is actually a split design allowing a compression fit in the flange towards the shaft devoid of set screws
The easy layout can make the set up and elimination quick whilst the 8° taper grips tight and delivers great concentricity
A Diminished level of stock might be attained because of the numerous other electrical power transmission parts that use Taper Lock Bushings for example: sheaves, sprockets, and pulleys
doesn’t supply the Taper-Lock Bushings themselves as they are extensively offered from other manufacturers